Drywall Repair – Home Improvement Tips

It does not matter how big or small the damage is; the damage will never go away not unless you do something about it. There are many factors that can cause damages to a Drywall. This makes some drywall repairs easy to repair, while others are not. However, with the right tools and materials, a person can perform few maintenance as well as improve their home. In cases where the problem is severe, it is wise to call an expert. For example, if the problem can affect structure integrity, it is wise to call a professional.

Well, if you are looking to improve your property and you are looking to start with drywall repairs, then you are in the right place. Below are steps to make such improvement:

The Steps For Small Holes

If the hole on the wall is small, then be glad because it will not take you more than 10 minutes to repair it. The first thing to do is clean the hole with a blade knife or something sharp. Cut the hole at an angle so that the outer part of the hole is bigger than the inner part. Fill the hole with painter’s putty. While at it, make sure it levels with the wall surface. First, let it dry before sanding the area lightly to make it smooth. Spackle more putty if there is a need to or repeating the step.

The Steps For Medium Holes

If the hole is medium, it is wise to use a drywall metal patch. How do you do this? Begin by sanding the surface around the hole to make it smooth. Wipe off the dust, then peel the paper patch of the metal drywall and firmly press it in place with the mesh facing outward. Using drywall compound and spread it over the patch to cover the edges. After smoothing it put, let it dry. Sand it gently until it is smooth. Do this until the patch cannot be detected.

The Steps For Large Holes

Larger holes require patches made of drywall. It is wise to ensure it has the patch is thick as the wall. Cut a squire of drywall slightly larger in comparison to the hole. Draw an outline of the patch around the hole using a pencil. It is paramount to check for electrical cords and plumbing lines where you plan to cut. Use a drywall saw to cut out the drawn area.

Screw two wooden boards (one of the top and the second at the bottom) behind the drywall to prevent it from falling through. Screw the drywall patch to the wooden boards and using compound drywall spread it onto the area and then add mesh. Sand the area until it is undetectable.